Daily maintenance of building materials aluminum profile doors and windows

Doors and windows, like human bodies and cars, need regular maintenance. Proper maintenance of aluminum doors and windows can not only prolong its service life, but also improve its safe use performance, so as to prevent door frames or glass from falling and hurting themselves or others, So what measures can we take to maintain aluminum profile doors and windows in our daily life? Here are some convenient and feasible maintenance tips for your reference only.

1： Clean

1. Cleaning of glass

① If there is only some dust and it is within reach, wipe it with a wet towel, wet the towel with clean water, and then screw it dry. Wipe the front and back of the glass respectively. If there are residual stains on the glass, wipe it with clean water again;

② If it is a high-rise building, use a glass eraser, so that people can stand on the ground. Where the reverse side is out of reach, ask professional cleaners to clean it. Be sure to pay attention to safety and don't stretch your body out of the window;

③ It can be wiped with waste newspaper. After repeated wiping by newspaper, dirt and other stains can be removed quickly, making the glass look brighter and new;

④ The leftover beer can also be used to wipe the glass;

⑤ Heat the edible vinegar slightly and dip it in a towel, which also has a good cleaning effect on the glass;

⑥ The toothbrush can be dipped in toothpaste to deal with stubborn stains, and then wipe them with a towel. Do not wipe them with a cleaning ball, so as not to leave marks on the glass surface and affect the appearance;

Take a basin of water, put a little detergent, laundry detergent and other neutral detergent evenly, wipe with a soft towel, wipe with water again, so as not to leave bubbles, do not use strong acid or strong alkaline detergent, will cause corrosion on the surface of glass.

2. Cleaning of door frame

Under normal circumstances, you can wipe it with a wet towel, or you can use the whitening effect of toothpaste. Wiping it with a toothbrush dipped in toothpaste will make the door frame brighter. For special stains, such as pen marks and paint marks, you can wipe it with rubber dipped in water, hot vinegar or even some turpentine, which can achieve a good cleaning effect for aluminum profile doors and windows.

3. Cleaning of push-pull groove

In the process of use, it is often found that aluminum profile doors and windows can neither be pushed nor pulled. At this time, do not push and pull forcibly to avoid damage to doors and windows. Pay attention to observe whether there are foreign objects in the push-pull groove of doors and windows, perhaps dust accumulation, stone sand left during assembly and repair, or sundries floating in the outside air, The following methods can be used for cleaning.

① As the push-pull groove of aluminum profile doors and windows is narrow and deep and cannot be reached by hand, you can wipe it roughly with a wet rag, and then pick up the wet rag with sharp objects such as chopsticks to shuttle back and forth in the groove, so that the dust in the groove can be adsorbed on the wet rag and stick it out together;

② For the stubborn and dried sand and stone, first shovel it loose with a small tool, be careful not to scratch the inner groove of aluminum profile doors and windows, then suck it back and forth with a vacuum cleaner (take off the head of the vacuum cleaner, only a straw is easier to use), and wipe it with a wet towel for several times, so as to clean up the dust and sundries.

2： Maintenance

In normal use, in addition to keeping the surface of aluminum profile doors and windows clean, pay attention to the use safety of other aspects, and try to open and close gently. If it is found that the doors and windows are difficult to push and pull, the door frame is loose, the glass is damaged, etc., remedial measures shall be taken in time to avoid safety faults and affect the service performance. Pay attention to the following points:

① Check whether the sealing strip of aluminum profile doors and windows is loose and aging. If so, replace it in time, otherwise it will cause rainwater infiltration and reduce its sealing performance and thermal insulation effect;

② Pay attention to observe whether the connectors and hardware accessories of various parts of aluminum profile doors and windows are complete, whether the door suction is loose, whether the screws are rusted or lost. If so, tighten them with a screwdriver in time or replace them directly, otherwise it is easy to cause the doors and windows to slide and damage the doors and windows;

③ If it is found that the slideway of doors and windows is blocked, drop a few drops of engine oil in the slideway, or grind and sprinkle the pencil lead into the groove, which can play a good role in lubrication and prolong the service life of aluminum profile doors and windows.